Why Do Seattle Homes Still Have Galvanized Plumbing?

Serving multiple locations throughout the USA

Including: Arizona, California, Colorado, Florida, Georgia, Illinois, Nevada, North Carolina, Oklahoma, Oregon, Texas, Utah & Washington

Why Do Seattle Homes Still Have Galvanized Plumbing?

Updated:  |  Published:

Older Seattle homes often mix new PEX with old galvanized
Older Seattle homes often mix new PEX with old galvanized

Many Seattle homeowners live in older properties that may still contain original galvanized plumbing installed when the homes were built.

While these pipes were once considered a reliable and affordable choice for residential water systems, decades of use have revealed the long-term problems that can develop with aging galvanized steel plumbing.

Because many Seattle homes were built during periods when galvanized steel was commonly used, homeowners may still have aging pipes that are approaching or have exceeded their expected lifespan.

Replacing outdated galvanized plumbing with a modern repipe system won't just protect your home; it can also restore reliable water flow, improve water quality, and reduce the risk of future pipe failures. In this article, we explain how to identify galvanized pipes, the problems they can cause, and when a whole-home repipe may be the best long-term solution for your Seattle home.

How Do I Know if My Seattle Home Has Galvanized Plumbing?

The easiest way to determine whether your Seattle home has galvanized plumbing is to inspect any exposed water supply pipes.

Galvanized pipes are made from steel coated with a protective layer of zinc, giving them a dull gray or silver appearance. They are commonly found in older Seattle homes built before copper and plastic piping became the preferred materials for residential plumbing.

However, many older Seattle homes may contain a mixture of plumbing materials due to previous repairs, remodels, or partial replacements.

Seeing a section of visible copper or PEX piping does not always mean your entire plumbing system has been updated. Older galvanized pipes may still be hidden behind walls, ceilings, or beneath floors.

Three Simple Ways to Check Your Seattle Home for Galvanized Plumbing

  • Use a magnet: Galvanized steel pipes are magnetic, while copper, lead, and plastic pipes are not.
  • Check the pipe color: Galvanized pipes typically appear dull gray, while copper has a recognizable reddish-brown color.
  • Perform a scratch test: Scratching a galvanized pipe with a screwdriver will usually reveal dull gray metal beneath any surface rust.

TOC

What Problems Do Galvanized Pipes Cause?

Although galvanized pipes were originally designed to resist corrosion, the protective zinc coating inside the pipe eventually becomes their biggest weakness.

Once this protective coating wears away, the exposed steel underneath begins to react with oxygen and minerals in the water, causing internal rust and corrosion.

The biggest issue with galvanized plumbing is that this corrosion often occurs inside the pipe, where it cannot be seen. Over time, rust and mineral buildup can narrow the inside diameter of the pipe, restricting water flow and reducing the performance of plumbing fixtures throughout your home.

Just some common problems caused by aging galvanized pipes include:

Once corrosion becomes widespread throughout your plumbing system, repairing individual sections will only provide temporary relief and could eventually cost more than replacing the entire system at once.

Does Seattle Water Cause Galvanized Pipes to Corrode Faster?

Seattle's water supply is known for its quality and comes from protected mountain watersheds.

Unlike many regions across the country that experience problems associated with hard water, Seattle's relatively soft water contains fewer minerals that contribute to limescale buildup inside plumbing systems.

However, that does not mean soft water prevents galvanized plumbing from aging. Over several decades, the zinc coating inside galvanized steel pipes can deteriorate, allowing rust and corrosion to restrict water flow and weaken the plumbing system.

Seattle's older homes are especially at risk because many galvanized plumbing systems have been in service for several decades.

TOC

Should I Repair or Replace Galvanized Plumbing in Seattle?

If only a small, isolated section of galvanized plumbing has failed in your Seattle home, a localized repair may temporarily resolve the immediate issue.

However, repairing one leaking section does not stop corrosion from continuing throughout the rest of the plumbing system. A single expensive leak repair may be followed by another failure elsewhere in the system, leading to repeated plumbing repairs and potential water damage to your home.

At Repipe Specialists, our Seattle whole-home repipes replace outdated galvanized water lines throughout your home with modern plumbing materials, such as Uponor PEX-A tubing or American-made Type L copper piping. Not only does this provide a long-term solution, but it also helps ensure your Seattle home has a reliable plumbing system for many years to come.

PEX tubing is a popular repiping choice for many Seattle homeowners because of its flexibility, corrosion resistance, and ability to require fewer connections compared with traditional rigid piping systems.

Contact us today to schedule a consultation with one of our local Seattle repipe consultants and receive a free written quote, either in-home or remotely.

TOC

Get your free estimate today

With over 80,000 repipes completed, we've perfected our One-Stop Repipe™ for your home.

Request Free Estimate

Get a Quote for a Whole-Home Repipe in Seattle

If your Seattle home still has galvanized plumbing, replacing your outdated pipes can provide a reliable long-term solution for improving your home's water flow and protecting against future plumbing failures. At Repipe Specialists, we have replaced outdated plumbing systems in thousands of homes since 1991 using modern PEX tubing and copper piping. Homeowners choose Repipe Specialists for:

  • Speed: Our repipe crews typically complete a repipe in a day, returning on another day for wall patching.
  • Convenience: Through our One-Stop Repipe™ process, we handle everything from permits to wall patching to inspections.
  • Cleanliness: Our crews are trained to protect your home while working (we cover all surfaces with protective sheeting), and to clean up fully at the end of each day.
  • Peace of Mind: Repipe Specialists is a fully licensed plumber in every state we operate in, and we back all of our repipes with a lifetime warranty.
  • Financing Programs: To help take the sting out of unplanned repipe expenses, we offer several financing programs.
  • Price: As a specialist that performs hundreds of repipes a week, we can deliver high-quality repipes at a lower cost than generalist plumbers. Our quotes typically range from $4,500 to $15,000 depending on the size and complexity of your project. We have an article that covers repipe cost factors in detail.

If your Seattle home has old galvanized plumbing, schedule a free in-home consultation today. Our local repipe consultants can assess your existing pipes, explain your replacement options, and provide a detailed quote for upgrading your home's outdated plumbing.

TOC

About Repipe Specialists

Expert Repiping at an Affordable Cost

Since our founding in 1991, we've been completing residential and multi-family building repipes to the highest standard.

With over 80,000 repipes completed, we've perfected our  One Stop Repipe™ process: providing you with a high quality and convenient repipe experience while offering significant savings compared to traditional plumbers - plus, our work is guaranteed for life.

Request Free Estimate

CONTACT US 24/7

Send us a Message
Missing Name
Enter a valid email address
Enter a valid 10-digit phone number as ###-###-####
Enter a valid 5-digit zip code
Please include a message before submitting.

Contact us by phone or email with any questions, or to schedule a no-obligation in-home consultation with one of our Estimators.

By Phone

Call 800-216-0132 to schedule an estimate. If you reach our answering service, please leave a message: we return calls in the order they are received.

By Email

Messages sent using the form on this site, go directly to our email, which we check regularly.

Company & License Information

Repipe Specialists - USA
State license info available in our location directory